The best DACs for Apple Music Lossless in 2025

Apple Music is one of the few streaming services that offers high-resolution audio (aka “lossless”) at no extra charge. But enjoying that extra quality on your phone usually requires some extra hardware. That is the purpose of this guide, — to help you find exactly what you need depending on how you prefer to listen. Every product listed below will help you squeeze more audio quality out of your Apple Music subscription. In fact, whatever music service you use, your listening experience will be enhanced. Best of all, most of these recommendations are compatible with Android, Mac and Windows devices, too.

Fortunately, as data plans become more generous and technology advances, listening to these larger-files in their full glory is less of a challenge. There are still some hardware hurdles though, especially if you use AirPods (or any wireless headphones) as Bluetooth technology is theoretically capable of delivering some higher-resolution audio, and Apple products don’t support the required technology (codecs such as Aptx, LDAC etc.). Confusingly, there are also different levels of “lossless” on Apple Music, with standard “CD quality” audio and then “Hi-Res Lossless” files that are recorded at even higher data rates. But don’t worry, we have a solution for you below, no matter how you prefer to listen to your music.

Of course, a DAC or dongle is only part of the equation — your headphones or speakers are also just as important. So if you’re looking for the absolute best audio experience be sure to check out our guide to the best headphones. Although these options are wireless, many can be used with a cable, too, making them the perfect pairing for our recommendations below.

Best DACs for 2025

DAC FAQs

What does DAC stand for?

DAC stands for digital to analogue converter. A digital-to-analog converter takes the digital (D) music from your phone or computer and converts (C) it into analog (A) sound you can hear. All phones and PCs have them, but since handsets moved to USB-C, Lightning or Bluetooth for music, the task of converting that signal was generally outsourced to either your adapter or your wireless headphones.

DACs can be used with phones, laptops and desktops but tend to be much simpler than a regular external audio interface. One basic distinction is that DACs are usually for listening only whereas an audio interface might have ports to plug in microphones and instruments (but an external audio interface is also technically a DAC). Some high-end DACs even include XLR outputs for better connectivity with professional audio equipment.

The best DACs tend to be lightweight, making them more suitable for mobile use, although it still gets a little tricky with the iPhone as you still might need to add another dongle to make it play nice with Lightning. Also, not all DACs support all the higher audio resolutions like DSD. Most standalone DACs require external power or an onboard battery, though some can use the power from whatever you plug them into — in which case expect a hit to your battery life.

Why do I need new hardware to listen to music?

The short answer is, you don’t. You can play “hi-res” audio files on most phones and PCs, you just might not be getting the full experience. If your device’s audio interface tops out at 44.1 or 48kHz (which is fairly common and covers the vast majority of music online) then that’s the experience you’ll get. If you want to enjoy better sounding music at a higher sample rate and bit-depth (aka resolution), you’ll need an interface that supports it and wired headphones, potentially using a headphone amp for an enhanced experience.

It’s worth pointing out that “lossless” and “hi-res” are related terms, but not the same thing and will vary from service to service. Apple uses ALAC encoding which is compressed, but without “loss” to the quality (unlike the ubiquitous .aac or .mp3 file formats). CDs were generally mastered to at least 16-bit / 44.1kHz which is the benchmark that Apple is using for its definition of lossless. In audio circles, a general consensus is that hi-res is anything with a sample rate above 44.1kHz. Increasingly, though, the term is being used for anything 96kHz and above.

This, of course, isn’t only about Apple’s new streaming formats. External DACs and audio interfaces are a great way to get the best sound and upgrade your listening experience generally. Especially if you want to get into the world of more exotic (read: pricey) headphones, as they often even require a DAC to provide enough clean digital signal to drive them. For audiophile headphones, a phone or laptop’s internal sound chipset often doesn’t have the oomph needed to deliver a hi-fi experience, meaning a better DAC could make all the difference in sound quality.

Okay, but can’t I just use the headphone adapter for my phone?

No. Well, yes, but see above. A Lightning or USB-C to 3.5mm headphone adapter often is an audio interface and most of the ones you’re buying for $7 (or that come free in the box) do not support hi-res audio beyond 48kHz / 24-bit. Android is a little more complicated, as some adapters are “passive” and really just connect you to the phone’s internal DAC like old school headphones. Others (active ones) have a DAC built-in and good luck finding out what your specific phone and the in-box adapter delivers. (Hint: connect it to a PC and see if it comes up as an audio interface. You might find some details there if it does).

What about Bluetooth headphones?

Chances are that over the last few years you’ve migrated from wired to wireless headphones (thanks, Apple). The world of Bluetooth headphones changes things a little when it comes to seeking better audio performance. What matters here is twofold, the headphones you’re using (as those will technically be the “DAC”) and the codec — the method used to send the musical data over to the headphones.

It’s also worth checking to see if your headphones support aptX and which version. Look out for aptX HD, aptX Adaptive and (for the highest quality) aptX Lossless which are all better than standard and becoming more common, albeit slowly. It’s worth noting that both your phone or media player and your headphones need to support the same aptX codec. Currently, no iPhone supports any type of aptX, though dongles exist that will offer that functionality.

Other higher-resolution Bluetooth codecs exist, like Sony’s LDAC, but Qualcomm’s AptX has wider support thanks to its prevalence in Android devices. Some high-end wireless headphones might even come with a headphone jack for wired connections when higher-quality audio is needed.

This article originally appeared on Engadget at https://www.engadget.com/audio/the-best-dac-for-lossless-high-resolution-music-iphone-android-160056147.html?src=rss